Ceiling Fan Installation: How to Properly Install Fans and Light Fixtures


ceiling fan installation

How to Install a Ceiling Fan With a Downrod: First you will need to locate the lower mount of the fan. The easiest way is to use the long screws that are supplied with the fan, but some people prefer to use the nut on the wall to bolt it down. Use the stud finder to locate the stud that is used for ceiling mounting on the outside of your wall. You will need two nuts, each one half an inch in diameter.

If you are using the instructions that come with your ceiling fan installation kit then you need to start by assembling the motor housing to a bracket and securing it to the ceiling studs with the bolts and washers supplied. Feed the wires through the hole in the mounting bracket attached to the outside of your wall. Remove the outer shipping block from the electric motor. Discard the old mounting bracket and save the nuts for the new blade assembly.

This step is pretty self-explanatory. However, it is good to know that the wiring for the new fan is already incorporated into the existing ceiling fan installation and wiring diagram. This saves a lot of time and makes replacing the wiring easier since you do not have to run the new electrical cables through the walls and into the new room. You will also need to install a new outlet box if the existing box is too large or is too close to the electrical box. If you do not know how to work with wires it’s better to call professionals. You can visit their website and send them a message of your concern.

Installing Ceiling Fans: If you are using a standard ceiling fan then all that you will need to do is install the blades. It is as simple as feeding the blades and balancing them on the spindle. Many ceiling fans these days come with a pre-made blade that you can simply install without any modifications. However, if you are not using one of these, simply feed the blades through the holes on the spindle, making sure they are seated neatly against the spindle. Now you can simply install the wiring for the light switch and turn on the power. There should be no problems.

Ceiling Fan Installation Saves Time and Money: One of the benefits of doing a ceiling fan installation at home is that it saves a tremendous amount of money. Not only is it significantly less expensive than buying one of the many ceiling fan products, but it can also save you time. If you install the units at home and do the installation yourself, you know exactly what goes where. All the electrical work that goes into it can be done by you. Therefore, you will avoid having to pay an electrician.

If you decide to use the instructions provided by the manufacturer for your brand of ceiling fans, then your job shouldn’t take more than an hour or so. You will need basic tools such as a screwdriver, screw, drill, and a pair of gloves. Be sure that you have a comfortable workspace. If you plan to do the installation yourself, make sure that you use the correct type of equipment for the job. Using an improperly fitted tool can cause serious damage to your ceiling fans, possibly even causing the blades to detach.

Always remember to follow the instructions included with your ceiling fan when you are installing it or purchase one to replace a broken one. You don’t want to be left in the dark because you used a screwdriver instead of a pair of gloves. Also, be sure that any electrical wiring you are installing is attached properly to your electrical outlets. Electrical work must be completed before any lighting on your ceiling fans can be installed.

Before you actually start assembling the fixture, the main wiring needs to be located. The reason is that ceiling fan wiring has to be run up through the ceiling. It then makes sense to find the main wiring then locate the electrical outlet. You can determine where the main ground wire goes by finding the main wiring first and then looking for the ground wire to its left. You will need to locate the three-pronged plug that will attach the electrical fixture to the wall.